How is the Carbide Mixing Tube working:
Inside the carbide Mixing Tubes, the pressurized water passes through a small-diameter orifice and forms a coherent jet of water.
The jet then passes through a venturi section where a metered amount of granular abrasive is drawn into the water stream. The mixture of water and abrasive particles passes through a special ceramic mixing tube and the resulting abrasive/water slurry exits the carbide Mixing Tubes as a coherent cutting stream of abrasive particles traveling at very high speed.

The Carbide Mixing Tubes Sizes:
ΦD(mm) |
Φd(mm) |
L(mm) |
θ° |
α° |
6.00 |
0.76 |
76.2 |
40 |
28 |
6.00 |
1.02 |
76.2 |
40 |
28 |
6.35 |
0.50 |
76.2 |
40 |
28 |
6.35 |
0.76 |
76.2 |
40 |
28 |
6.35 |
1.02 |
76.2 |
40 |
28 |
7.14 |
0.76 |
76.2 |
40 |
28 |
7.14 |
1.02 |
76.2 |
40 |
28 |
7.60 |
0.76 |
76.2 |
40 |
28 |
7.60 |
1.02 |
76.2 |
40 |
28 |
9.45 |
0.76 |
76.2 |
40 |
28 |
9.45 |
1.02 |
76.2 |
40 |
28 |
For more information about Carbide Mixing Tubes, please feel free to contact us at +86 0731 22995400 or
sales@ejtungsten.com (Click the email can send message directly)